Hariom Electronics

JUMBO Load Cell LOADPIN® 

HE 6810 is a Strain Guage based low profile bending beam Jumbo Load Cell.
It is Ideal for precision single point platform scale applications.
It is designed for low eccentric load sensitivity.
This Load Cell supports large platform size of 1000 x 1000 meters.

Applications.

• Large Platform Scales
• Steel Weighers
• Silo & Tank Weighers
• Vessel Weighing
• Construction Machineries

Additional Information:

• Item Code: HE-6810
• Production Capacity: 10000nos
• Delivery Time: 4 WEEKS
• Packaging Details: 4 PEICES PER BOX

We offer Conveyor Weighing Model. This is an important component of conveyor/Belt weighing system. It is based on a popular 8-bit micro controller. The system monitors input and display flow rate. It also integrates input over a period of time. This integrated total is non resettable.

Specifications:

• Input : Load cell, Proximity (PNP type)
• Display : 14 Digit 7-segment 0.56” Red LED

Display organized in three groups:

• Aggregate Rate (Tons/Hour) : 4 Digits
• Conveyor Speed (Meter/Sec) : 3 Digits
• Total aggregate (Tons) : 8 Digits
• Non-resettable : eight digit Totalizer(Reset possible only through Password)
• Keypad : Eight keys membrane keypad
• Discrete LEDs : Two
• Power Supply : 110-230VAC ± 10%
• Proximity power supply : 24V DC/50 mA
• Output Options : 0 to 10 V DC
• Relays : One for alarm condition
• Serial interface : RS232 or RS485 (Optional)
• Scaling method : Linear (Multiplying factors: Programmable)
• Warm up time : 10 Minutes
• Accuracy : 0.1 % of FS ± 1 Digit
• Enclosure : Metalized DIN standard, Panel Mounting type

Dimensions:

• Outer: 144 (W) x 144 (H) x 120 (D)
• Cutout: 138 mm x 138 mm

General Specifications of this unit are:

• On board 24-bit ADC : is provided for Digitizing Analog Input.
• Filtering : Analog & Digital
• Sampling speed : 15 readings/second
• Power Supply : 24 VDC
• Input : 4-wire Load cell, Up to Four Single Load cell with 300 Ohms Resistor
• Remote input : for GROSS/NET, TARE and Zero functions
• Display : 6-digit 7-segment 0.56” Red LED
• Decimal position : Selectable.
• Key board : Four keys membrane like
• Programmable Parameters : Decimal Point, Capacity, Display Resolution, Grad, Zero Track Band, Zero Range
• Configuration Data : are stored in serial NVRAM, Battery back up not required
• Calibration : through software (Offset:‘Z’ & Span:‘S’ stored in NVRAM)

Optional:

• Serial Port for communication with the remote display/Printer/Computer using RS-485/RS-232
• Outputs : One Digital output (opto isolator)
• Retransmission : 4-20 mA/0-10V Proportional indicated weight
• Enclosure : Plastic, General Purpose, Panel Mounting type

Dimension:

• Outer: 96 mm (W) x 48 mm (H) x 110 mm (D)
• Cut-out: 92 mm (W) x 44 mm (H)

Additional Information:

• Item Code: 101
• Delivery Time: 1 WEEK
• Packaging Details: packed one peice in one number corrugated box