Process Weight Indicator

Technical Specifications :

Operating Supply : 110-230V AC/24VDC
Display : 128 x 64 Graphics LCD display with backlit/240 x 128 Graphics LCD 25, 40 discrete LEDs for Process status indication
Keyboard : 20 keys membrane Keypad
Analog Inputs : Four channels for Loadcell.
Excitation voltage : 5VDC
Pulse Inputs : For water feeding thro’ water meter
Field Programmable parameters: Set points/Offset of all component, Filter, Various timings for batching sequence
Control Outputs : Up to 24 relay outputs
1-Control of Component Feeding Gate
2-Discharge, Alarm, Mixer Gate On/Off
3-Status: Batch Over, Batch Ready
Digital Inputs : Up to 24 digital inputs to read status & remote commands ( Auto/Manual/Semi Auto Switch, Bucket Top/Bottom, Start, Stop Commands )
Calibration : Offset & Span calibration through software using keypad
Reports : Batch wise online print, offline print, summary print, recipe print etc...
Serial Interface : RS-232/RS-485 (for Printer/Computer)
Mechanical Data : Mounting: Panel mounting
Dimensions: Outer: 303 (W) x 243 (H) x 170 (D) mm
Cutout Size: 265 (W) x 223 mm (H)

• Item Code: 3016
• Production Capacity: 100 Pieces per Week
• Delivery Time: 15 Days
• Packaging Details: Packaging in Corrugated Boxes

 

We offer Process Weight Indicator . This is a microcontroller based Indicator unit. It is highly versatile, accurate and different from the conventional indicators. It displays analog signal (mV) input form the loadcell into engineering values. With the help of the keypad and display, unit allows to set and modify various configuration parameters and calibration.

This is a microcontroller based Indicator unit. It is highly versatile & accurate. It displays engineering value of analog signal (mV) input from the load cell. Most useful in Load Testing, Packaging Machines, Automation Systems, Filling, Check Weighing Systems etc.

 

General Specifications of this unit are:

• ADC : On-board high resolution ADC.

• Filtering : Analog & Digital

• Sampling : 15 readings/second

• Power Supply : 110-230VAC, 50 Hz.

• Input : 4-wire Load cell, Up to Four Single Load cell with 300 Ohms Resistance

• Options Outputs : Two Relay outputs

Retransmission: 4-20 mA/0-10V Proportional indicated weight
RS-232/485 Serial Port for communication with remote display/ Printer/ Computer

• Remote input : for GROSS/NET, TARE and Zero functions

• Display : 6-digit 16-segment 0.8” Red LED

• Key board : Six keys membrane like

• Programmable Parameters : Decimal Point, Capacity, Display Resolution, Grad, Zero Track Band, Zero Range

• Configuration Data : are stored in serial NVRAM, Battery back up not required

• Calibration : through front keypad (Offset:‘Z’ & Span:‘S’ stored in NVRAM)

• Different Password : for Calibration & normal operation

• Enclosure : Metallic, Powder coated, General Purpose, Panel Mounting type

• Dimension : Outer: 192 mm (W) x 96 mm (H) x 110 mm(D)

• Cutout: 186 mm (W) x 92 mm (H)

 

• Item Code: WI-2009

Display Unit offeredprovide for precise functional support and can be made available in different model options including conveyor weighing model as demanded by the customers. As an important support for weighing system, it features 8-bit micro controller and provides display support with aggregate rate (Tons/Hour) of 4 digits, conveyor speed (Meter/Sec) of 3 Digits and total aggregate (Tons) of 8 digits. Some of its features include eight keys membrane keypad, working power supply of 110-230VAC ± 10%, relay support for alarm condition, optional serial interface of RS232 or RS485, linear scaling method, working accuracy of 0.1 % of FS ± 1, metalized DIN standard/panel mounting type enclosure support among others.